Influência do tipo de trajetória no desgaste da ferramenta e na rugosidade da peça no fresamento do aço Hardox®
This research investigated the behavior of two trajectory techniques in the milling of an advanced high-strength steel (AHSS), Hardox® 500 steel of the SSAB brand. The objective of this work was to measure the hardness of the material, verifying if it is the same informed by the manufacturer, and th...
Autor principal: | Mildenberger, Victor Hugo Grande |
---|---|
Formato: | Trabalho de Conclusão de Curso (Graduação) |
Idioma: | Português |
Publicado em: |
Universidade Tecnológica Federal do Paraná
2021
|
Assuntos: | |
Acesso em linha: |
http://repositorio.utfpr.edu.br/jspui/handle/1/26135 |
Tags: |
Adicionar Tag
Sem tags, seja o primeiro a adicionar uma tag!
|
id |
riut-1-26135 |
---|---|
recordtype |
dspace |
spelling |
riut-1-261352021-10-09T06:05:53Z Influência do tipo de trajetória no desgaste da ferramenta e na rugosidade da peça no fresamento do aço Hardox® Influence of trajectory type on tool wear and workpiece roughness in Hardox® steel milling Mildenberger, Victor Hugo Grande Rosa, Sílvia do Nascimento Rosa, Sílvia do Nascimento Przybysz, Aldo Fals, Hipolito Domingo Carvajal Usinagem Aspereza de superfície Engenharia mecânica Machining Surface roughness Mechanical engineering CNPQ::ENGENHARIAS This research investigated the behavior of two trajectory techniques in the milling of an advanced high-strength steel (AHSS), Hardox® 500 steel of the SSAB brand. The objective of this work was to measure the hardness of the material, verifying if it is the same informed by the manufacturer, and then choose the best machining strategy through the analysis of roughness, tool wear and corrosion rate. In milling, rejoinders were carried out so that the roughness measurement could be performed. The wear analysis was performed using optical microscopy, the corrosion rate was performed from tests according to ASTM G59-97 standard. Considering the parameters used, the strategy that showed the best performance was the Zig-Zag. Esta pesquisa investigou o comportamento de duas técnicas de trajetória no fresamento de um aço avançado de alta resistência, o aço Hardox® 500 da marca SSAB. Objetivou-se no trabalho medir a dureza do material, verificando se é o mesmo informado pela fabricando, e então eleger a melhor estratégia de usinagem através das análises de rugosidade, desgaste da ferramenta e taxa de corrosão. No fresamento foram realizadas tréplicas para então ser realizado a medição de rugosidade. A análise de desgaste foi realizada através de microscopia ótica, a taxa de corrosão foi realizada a partir de ensaios conforme norma ASTM G59-97. Considerando os parâmetros utilizados, a estratégia que apresentou o melhor desempenho foi a Zig-Zag. 2021-10-08T15:37:14Z 2021-10-08T15:37:14Z 2021-08-27 bachelorThesis MILDENBERGER, Victor Hugo Grande. Influência do tipo de trajetória no desgaste da ferramenta e na rugosidade da peça no fresamento do aço Hardox®. 2021. 42 f. Trabalho de Conclusão de Curso (Graduação) – Universidade Tecnológica Federal do Paraná, Guarapuava, 2021. http://repositorio.utfpr.edu.br/jspui/handle/1/26135 por openAccess application/pdf Universidade Tecnológica Federal do Paraná Guarapuava Brasil Engenharia Mecânica UTFPR |
institution |
Universidade Tecnológica Federal do Paraná |
collection |
RIUT |
language |
Português |
topic |
Usinagem Aspereza de superfície Engenharia mecânica Machining Surface roughness Mechanical engineering CNPQ::ENGENHARIAS |
spellingShingle |
Usinagem Aspereza de superfície Engenharia mecânica Machining Surface roughness Mechanical engineering CNPQ::ENGENHARIAS Mildenberger, Victor Hugo Grande Influência do tipo de trajetória no desgaste da ferramenta e na rugosidade da peça no fresamento do aço Hardox® |
description |
This research investigated the behavior of two trajectory techniques in the milling of an advanced high-strength steel (AHSS), Hardox® 500 steel of the SSAB brand. The objective of this work was to measure the hardness of the material, verifying if it is the same informed by the manufacturer, and then choose the best machining strategy through the analysis of roughness, tool wear and corrosion rate. In milling, rejoinders were carried out so that the roughness measurement could be performed. The wear analysis was performed using optical microscopy, the corrosion rate was performed from tests according to ASTM G59-97 standard. Considering the parameters used, the strategy that showed the best performance was the Zig-Zag. |
format |
Trabalho de Conclusão de Curso (Graduação) |
author |
Mildenberger, Victor Hugo Grande |
author_sort |
Mildenberger, Victor Hugo Grande |
title |
Influência do tipo de trajetória no desgaste da ferramenta e na rugosidade da peça no fresamento do aço Hardox® |
title_short |
Influência do tipo de trajetória no desgaste da ferramenta e na rugosidade da peça no fresamento do aço Hardox® |
title_full |
Influência do tipo de trajetória no desgaste da ferramenta e na rugosidade da peça no fresamento do aço Hardox® |
title_fullStr |
Influência do tipo de trajetória no desgaste da ferramenta e na rugosidade da peça no fresamento do aço Hardox® |
title_full_unstemmed |
Influência do tipo de trajetória no desgaste da ferramenta e na rugosidade da peça no fresamento do aço Hardox® |
title_sort |
influência do tipo de trajetória no desgaste da ferramenta e na rugosidade da peça no fresamento do aço hardox® |
publisher |
Universidade Tecnológica Federal do Paraná |
publishDate |
2021 |
citation |
MILDENBERGER, Victor Hugo Grande. Influência do tipo de trajetória no desgaste da ferramenta e na rugosidade da peça no fresamento do aço Hardox®. 2021. 42 f. Trabalho de Conclusão de Curso (Graduação) – Universidade Tecnológica Federal do Paraná, Guarapuava, 2021. |
url |
http://repositorio.utfpr.edu.br/jspui/handle/1/26135 |
_version_ |
1805315950861352960 |
score |
10,814766 |