Conversor CC-CC ZVS PWM híbrido do tipo T com saída em tensão
This work presents the analysis of an isolated DC-DC converter with soft switching and capacitive output filter, for applications with a wide input voltage range, called Hybrid T-type Zero-Voltage-Switching Pulse-Width-Modulated DC-DC converter (HT2-ZVSPWM). The converter studied contains six switch...
Autor principal: | Van Kan, Rafael Felipe |
---|---|
Formato: | Dissertação |
Idioma: | Português |
Publicado em: |
Universidade Tecnológica Federal do Paraná
2018
|
Assuntos: | |
Acesso em linha: |
http://repositorio.utfpr.edu.br/jspui/handle/1/2945 |
Tags: |
Adicionar Tag
Sem tags, seja o primeiro a adicionar uma tag!
|
id |
riut-1-2945 |
---|---|
recordtype |
dspace |
spelling |
riut-1-29452018-05-25T17:46:01Z Conversor CC-CC ZVS PWM híbrido do tipo T com saída em tensão A hybrid T-type ZVS PWM DC-DC converter with capacitive output Van Kan, Rafael Felipe Agostini Junior, Eloi http://lattes.cnpq.br/8441361506900775 Waltrich, Gierri Nascimento, Claudinor Bitencourt Agostini Junior, Eloi Conversores de corrente elétrica Circuitos de comutação Tensão - Concentração Modulação (Eletrônica) Electric current converters Switching circuits Stress concentration Modulation (Electronics) CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA Engenharia Elétrica This work presents the analysis of an isolated DC-DC converter with soft switching and capacitive output filter, for applications with a wide input voltage range, called Hybrid T-type Zero-Voltage-Switching Pulse-Width-Modulated DC-DC converter (HT2-ZVSPWM). The converter studied contains six switches, four of which are submitted to the entire input voltage value and the other two, which constitute the Type T cell, are subjected to half of this voltage. The proposed three-level and four-level modulations are applied to generate the switching signals, which ensures ZVS operation for all converter switches in the continuous conduction mode. The work is structured in theoretical analysis for both continuous and discontinuous conduction modes, stress analysis, dynamic analysis, design methodology and experimental results in which results are analyzed for a minimum voltage and a maximum input voltage. Theoretical analysis, design example and experimental data for 1.2 kW, 240 – 480 Vdc input, 300 Vdc output, and 50 kHz switching frequency laboratory prototype are analyzed. Measured efficiency are obtained from experimental trials with the prototype for fixed point operation and wide input voltage range. For fixed point the efficiency was of 97.38% at full load and for wide range were of 96.35% (240 V) and 95.72% (480 V) in 60% and 70% of the nominal power, respectively. Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) Neste trabalho, apresenta-se o estudo de um conversor CC-CC isolado com comutação suave e saída em tensão, destinado a aplicações com ampla faixa de tensão de entrada, com o nome em inglês Hybrid T-type Zero-Voltage-Switching Pulse-Width-Modulated DC-DC converter (HT2-ZVS-PWM). O conversor estudado possui seis interruptores, sendo quatro deles submetidos ao nível máximo da tensão de entrada e os outros dois, que constituem a célula tipo T, submetidos a metade desta tensão. São propostas modulações de três níveis e quatro níveis aplicadas no comando dos interruptores, as quais possibilitam comutação suave do tipo ZVS para os mesmos, no modo de condução contínua. O trabalho é estruturado em análise teórica para os modos de condução contínua e descontínua, análise de esforços nos elementos do conversor, análise da comutação dos interruptores, análise dinâmica, metodologias de projeto e resultados experimentais, em que se analisam resultados para uma tensão mínima e uma tensão máxima de entrada. Utiliza-se 1,2 kW, 240 V – 480 V de entrada, 300 V de saída e frequência de comutação de 50kHz para a comprovação das análises que serão realizadas. Rendimentos são obtidos a partir de ensaios experimentais com o protótipo para operação com ponto fixo e ampla faixa de tensão de entrada. Para ponto fixo o rendimento foi de 97,38% em potência nominal e para ampla faixa foram de 96,35% (240 V) e 95,72% (480 V) em 60% e 70% da potencia nominal, respectivamente. 2018-02-27T13:28:05Z 2018-02-27T13:28:05Z 2017-12-18 masterThesis VAN KAN, Rafael Felipe. Conversor CC-CC ZVS PWM híbrido do tipo T com saída em tensão. 2017. 319 f. Dissertação (Mestrado em Engenharia Elétrica) - Universidade Tecnológica Federal do Paraná, Ponta Grossa, 2017. http://repositorio.utfpr.edu.br/jspui/handle/1/2945 por openAccess application/pdf Universidade Tecnológica Federal do Paraná Ponta Grossa Brasil Programa de Pós-Graduação em Engenharia Elétrica UTFPR |
institution |
Universidade Tecnológica Federal do Paraná |
collection |
RIUT |
language |
Português |
topic |
Conversores de corrente elétrica Circuitos de comutação Tensão - Concentração Modulação (Eletrônica) Electric current converters Switching circuits Stress concentration Modulation (Electronics) CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA Engenharia Elétrica |
spellingShingle |
Conversores de corrente elétrica Circuitos de comutação Tensão - Concentração Modulação (Eletrônica) Electric current converters Switching circuits Stress concentration Modulation (Electronics) CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA Engenharia Elétrica Van Kan, Rafael Felipe Conversor CC-CC ZVS PWM híbrido do tipo T com saída em tensão |
description |
This work presents the analysis of an isolated DC-DC converter with soft switching and capacitive output filter, for applications with a wide input voltage range, called Hybrid T-type Zero-Voltage-Switching Pulse-Width-Modulated DC-DC converter (HT2-ZVSPWM). The converter studied contains six switches, four of which are submitted to the entire input voltage value and the other two, which constitute the Type T cell, are subjected to half of this voltage. The proposed three-level and four-level modulations are applied to generate the switching signals, which ensures ZVS operation for all converter switches in the continuous conduction mode. The work is structured in theoretical analysis for both continuous and discontinuous conduction modes, stress analysis, dynamic analysis, design methodology and experimental results in which results are analyzed for a minimum voltage and a maximum input voltage. Theoretical analysis, design example and experimental data for 1.2 kW, 240 – 480 Vdc input, 300 Vdc output, and 50 kHz switching frequency laboratory prototype are analyzed. Measured efficiency are obtained from experimental trials with the prototype for fixed point operation and wide input voltage range. For fixed point the efficiency was of 97.38% at full load and for wide range were of 96.35% (240 V) and 95.72% (480 V) in 60% and 70% of the nominal power, respectively. |
format |
Dissertação |
author |
Van Kan, Rafael Felipe |
author_sort |
Van Kan, Rafael Felipe |
title |
Conversor CC-CC ZVS PWM híbrido do tipo T com saída em tensão |
title_short |
Conversor CC-CC ZVS PWM híbrido do tipo T com saída em tensão |
title_full |
Conversor CC-CC ZVS PWM híbrido do tipo T com saída em tensão |
title_fullStr |
Conversor CC-CC ZVS PWM híbrido do tipo T com saída em tensão |
title_full_unstemmed |
Conversor CC-CC ZVS PWM híbrido do tipo T com saída em tensão |
title_sort |
conversor cc-cc zvs pwm híbrido do tipo t com saída em tensão |
publisher |
Universidade Tecnológica Federal do Paraná |
publishDate |
2018 |
citation |
VAN KAN, Rafael Felipe. Conversor CC-CC ZVS PWM híbrido do tipo T com saída em tensão. 2017. 319 f. Dissertação (Mestrado em Engenharia Elétrica) - Universidade Tecnológica Federal do Paraná, Ponta Grossa, 2017. |
url |
http://repositorio.utfpr.edu.br/jspui/handle/1/2945 |
_version_ |
1805301380497276928 |
score |
10,814766 |